Autómata programable en riel DIN 21+24V30W

por red EthernetModbusRS485

INCLUYE *MDUINO PLC ARDUINO ETHERNET 21 I/Os PLUS: – 13 Entradas: – 8 Salidas: *FUENTE DE ALIMENTACIÓN 24Vdc,30W *CABLE ELECTRICO 0.75mm(x5m Blue, x5m Amarillo, x5m Negro Descripción Entradas, Salidas, Comunicaciones y otras especificaciones técnicas Inputs (Arduino Mega included) – 13 Input: (6x) Analog (0-10Vdc) / Digital (5-24Vdc) configurable by software. (7x) Digital Isolated (5-24Vdc). Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Outputs (Arduino Mega included) – 8 Output: (8x) Digital Isolated (5-24Vdc) / (3 of which) PWM Isolated (3 of which) Analog (0-10Vdc) configurable by switch. Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Velocidad de Clock: 16MHz *Rx,Tx pins are not abailable using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)